北京科技大學博士生導師簡介:蔡嗣經

導師姓名

蔡嗣經

性別

出生年月

1952年10月

技術職稱

教授

行政職務

處長

所在學院

土木與環境工程學院

招生專業

采礦工程

聯系電話

010-62332208

E-mail

sjcai@

研究方向

1、礦床開采理論與技術
2、安全技術及工程
3、采礦工程計算機模擬及應用

畢業院校信息:
1991年畢業于北京科技大學大學、日本京都大學(學院)采礦工程專業獲博士學位

個人簡況

  蔡嗣經,男,1952年10月生,江西南昌人,曾在澳大利亞新南威爾士大學和日本京都大學留學,獲碩士和博士學位。現任北京科技大學教授、博士生導師、教務處處長。曾先后為本科生、碩士生、博士生主講多門課程;指導已畢業碩士研究生十余名、已畢業和在讀博士生三十余名。獲省部級教學成果一等獎1項、二等獎2項。主要科研方向?yàn)椋海?)礦床開采理論與技術,著重于采礦理論與方法、礦山巖土力學、礦山新技術等方面的研究;(2)采礦工程計算機模擬及應用研究;(3)礦山安全技術工程研究。自1980年以來在國內外發表科技論文100余篇,出版專著2本,參編學術著作3種,獲省部級科技進步二等獎3項,三等獎1項。
  通訊地址:北京市學院路30號 北京科技大學教務處郵政編碼:100083;
  電話:010-62332208;
  傳真:010-62332526
  E-mail: sjcai@
  Dr. Sijing CAI, male, borne in October, 1952 and in the Jiangxi province, CHINA, is a chair professor of mining engineering in the Department of resources engineering,
School of civil and environmental engineering, University of Science & Technology Beijing (USTB), and the Dean of Education administration Office, USTB. He is also
a member of Degree committee and a member of Academic affairs committee of USTB, a member of safety engineering education guidance committee supported by the
China ministry of education. He has given lectures both for undergraduate and postgraduate students on various subjects, and a number of postgraduate students both for
master degree and Ph.D. degree had been or is under his supervision. In recent years, he has received one First-class reward and two Second-class rewards on Education
achievement from the Beijing City government or from the China ministry of education.
The most interesting research areas for Professor CAI are that:
(1)Advancedtechnologies in mining engineering, especially for development of new mining methods, geomechanics, new mining equipment, and new techniques;
(2)Computer modeling and its application in mining industry;
(3)Safety technology and safety engineering both in mining and in general industries. Since 1980, he has published 5 technical books and more than 100 papers.