1.Consider what we know intuitively about an integrator. If you apply a DC signal at the input (i.e. , zero frequency), the output will describe a linear ramp that grows in amplitude until limited by the power supplies. Ignoring that limitation, the response of an integrator at zero frequency is infinite, which means that it has a pole at zero frequency. (A pole exists at any frequency for which the transfer function’s value becomes infinite.)
1.我們?cè)趺磸闹庇^上理解積分器呢？假設在輸入端加上一個直流信號（頻率為0），那么在輸出端將會出現一個線性斜坡信號,其幅度一直增至電源電壓。如果不考慮電源電壓對輸出信號的限制，積分器在零頻率上的響應將是無窮大，這意味著它在零頻率點上存在一個極點（在任何使傳遞函數為無窮大值的頻率點上都存在一個極點）。

2.While the complex frequency’s imaginary part helps describe a response to AC signals, the real part helps describe a circuit’s transient response.
2.復頻率的虛部有助于描述電路對交流信號的響應，而其實部有助于描述電路的瞬態響應。

3.The low-pass filter’s transient response is more stable, because its pole is in the negative-real half of the complex plane.
3.低通濾波器的瞬態響應更加穩定，因?yàn)槠錁O點位于復平面的左半部。

4.Clock Driver Skew (Intrinsic Skew) is the amount of skew caused by the clock driver itself. There are two kinds of clock driver devices; buffer devices and PLL-based devices. Skew occurs on the output of the buffer devices because of the differences in propagation delay of the input signal through the device.
4.時鐘驅動器偏移（固有偏移）是由時鐘驅動器自己引起的偏移。有兩種類型的時鐘驅動設備，緩存器件和基于鎖相環的器件。偏移發生在緩沖器件的輸出端，因?yàn)檩斎胄盘?hào)通過器件時，其傳播延遲有差異。

5.The capacitance is directly proportional to the dielectric constant of the material and to the area of the plates and inversely to the distance of the plates.
5.電容器的電容量與介質的介電常數及平板的面積成正比，與平板間的距離成反比。

?